|
Articles - Accessories & Enhancements |
STLPCA 02-04-2010 06:34 PM
Converting from the oem lug bolts to wheel studs and lug nuts is a simple & inexpensive DIY as can be seen in the photos below. I already had several sets of Porsche aluminum lug nuts for street use & steel lug nuts for track use left over from my 993 saving me that cost. Porsche aluminum or steel lug nuts are regularly available on eBay, as well as new from many Porsche parts sources.
You'll need to buy 20 studs. I bought a few extras as spares which I carry in my track box (along with a...
70 Comments
The Chad 01-21-2010 06:01 PM
This is the BEST money that I have ever spent! Hands Down…
Well first things first, I encountered some little problems during the install. Scott did an awesome job on the install article he posted on his web site: http://www.softronictuning.com/installation/. The article is on the 3.4 so I had to deviate and modified it to fit the 2.7. I cut the slit in the large vacuum hose by accident. Try not to do this if you can help it.
There is enough room to fight the hose, to get it off...
5 Comments
Gator Bite 01-20-2010 05:03 PM
It was January 2007. I had my Cayman S for four short months and I was about to break a promise I'd made to myself. A friend had asked me if I'd be willing to install a Borla exhaust system on my Cayman and write up an article on what I thought. At first I declined. I really didn't have the money to spend on something like this, and I had promised myself I wouldn't start down the slippery slope of vehicle modifications with my Cayman S, a road I'd been down before with poor results. I was sort...
30 Comments
Gator Bite 01-10-2010 02:05 PM
Let's face it, there are times when you just can't prevent the installation of a front license plate, which unfortunately comes with irreversible damage to the nose of your car. For me, it was tourist delivery that made it necessary for my front bumper to be drilled. This wouldn't be so bad if they didn't just blow screws into the plastic, but that's what they do, and the tension from those screws distorts the plastic around the hole into a volcano like head. Lucky for us, there are Bumper...
13 Comments
Gator Bite 01-10-2010 01:24 PM
Article Addendum, August 14th, 2011.
ATTENTION: After 25,000 miles with this product on my car I have experienced a serious problem with my original exhaust components. Please see this thread for more information. Based on these developements, I advise the addition of a stress relieving flex joint to the downpipes of this system.
3
You should see some of the looks I get when I tell people that I've changed the exhaust system on my two year old Porsche seven times since I bought it. I...
49 Comments
webbie 01-06-2010 08:07 PM
This is just a summary of what consolidated, FT and L8Apx have done. :thanks:
First thing first, disconnect the battery and leave the trunk and hatch open. Leave them open until you are done with the DME.
Background information, I am using Traqmate complete kit and Traqdata II.
E6-RPM green/blue into RPM port
D16-TPS violet into A0 port
33 Comments
Gator Bite 01-01-2010 09:55 AM
I remember it like it was yesterday. I’m referring of course to my first two weeks in my Cayman S. As one of the few Americans that had checked the ‘European Delivery’ option box, I had the rare opportunity to explore the limits of my new Porsche without the fear of legal complications. That’s right…. I was on the German autobahn, the A-31 to be exact, and I had just passed one of those nifty ‘No Speed Limit’ signs. I leaned into the throttle and let the speedometer climb.
...
29 Comments
|
|
|
All times are GMT -4. The time now is 11:22 PM.