|
Articles - Accessories & Enhancements |
lithium1330 12-19-2012 12:39 PM
IMPORTANT NOTICE!: The US National Highway Traffic Safety Administration (NHTSA) has done extensive research and found that Tire Pressure Monitoring Systems (TPMS) reduce highway fatalities. Federal laws/codes require all passenger vehicles of <10,000 lbs. GVWR produced on or after September 1, 2007 to include TPMS and prohibits the act of disabling it. Applying the alteration contained below to a car that is registered for street use may violate Federal and/or State Motor Vehicle Safety Laws,...
2 Comments
Rob VN 08-25-2012 03:59 PM
This article describes the installation of an external air to oil cooler on my 2007 Cayman 2.7L. The cooler is mounted on the left side of the trans axle with air from under the car fed to the cooler. I want to keep my engine oil temperature as close to 200 degrees as possible during hard driving on the track in sunny FL and gain some additional oil pressure promised by the deletion of the stock oil cooler. The major elements of this install are a Setrab single fan pack & mounting kit, 180...
3 Comments
Rob VN 08-19-2012 10:46 AM
This article describes the installation of a trans axle oil cooler onto my 2007 Cayman 5 speed. I was inspired by Al Norton's article on RENNTRACK.com where he added a water to transmission oil cooler to his 996 Turbo. It is reversible ( no drilling of the transaxle case ). The trans axle oil cooler is a longevity modification for track operation since our Cayman trans axles are bathed in heat from both the engine and exhaust system. The system consists of an air to oil cooler, oil pump,...
14 Comments
Speedy 08-08-2012 12:17 PM
987.1 Cayman LED Running Lights / Radiator Protectors
by Mike Santowasso, Cayman Register member "Speedy"
Background
Several weeks ago, I threw my name in the hat for a chance to take part in a PCA sponsored project to create a “how to” documentary on the installation of a set of LED Spars on a Cayman. The LED spars can be purchased for $399 (and would be provided to me for free). They were designed and produced by PCA member and Cayman enthusiast =11967"]Joseph DeSimone. They’re a...
46 Comments
Flybot 07-15-2012 10:27 AM
I decided to make my own grill mesh to fill in the gaping holes in the rear bumper of my 2012 Cayman R.
This is a very simple DIY and I did it in a few hours and for about $50. I think it turned out great.
First, after much google searching and getting real smart on what kind of different mesh materials are available such as perforated, woven, or expanded, plastic, aluminum, steel, brass, etc, I came across the perfect material that I think looks much more finished than the expanded mesh...
1 Comments
lithium1330 06-28-2012 09:16 PM
987.1 Center console removal/Shifter Install DIY Guide
Desertdrew wrote a detailed article on the schnell short shift install - great guidance. Though, there were a couple of steps that could be eliminated (keep knob/boot in 1 piece & remove console by undoing just 1 electrical plug) to simplify the process.
Note some of the pictures are rotated the wrong way - I couldn't fix them. However, you can download the PDF (pictures right-side up) here: https://www.box.com/s/25aa98e5bdceda3589c0...
3 Comments
lithium1330 06-28-2012 09:09 PM
Laser Interceptor (LI) Laser Jammer Installation Procedure on 987
You can download the PDF version here:
https://www.box.com/s/089dec34accb6d66be3d
The write up applies to 987 (boxster & cayman), but should also be applicable to the 997 cars - just about all the components I worked with in this guide are from the 997 parts bin (i.e., they have 997 part numbers). This document also assumes you have basic knowledge working with automotive electronics, handy with tools and have standard...
4 Comments
Flybot 03-22-2012 11:27 PM
.
I was inspired to paint some of the interior trim on my Cayman R after seeing a few pics of this factory Porsche Exclusive Peridot Green example.
After searching for as much info as possible on painting interior car plastics I settled on a plan. Sending parts away to a professional is an option, but expensive. Local shops may paint parts cheaply, but I don’t think they take the proper time to do it right. I do not claim to be an auto body professional, but I did get...
17 Comments
Rob VN 03-04-2012 07:47 PM
This article discusses the installation of the WEVO sport engine mount into a 2007 Cayman 2.7L shown here at Tarett's website: http://www.tarett.com/items/boxster~cayman-products/986-987-engine~transmission~brakes-/semi-solid-987-986-eng-mount-detail.htm. The sport engine mount can improve the responsiveness of the car. ( Witness the 981 with computer controlled mounts ) The result of this mod has quite an impact in the cabin: You will feel alot more vibration in the seat and the steering...
6 Comments
Rob VN 12-03-2011 09:59 PM
3/16/13 Update: I recently received an email from RSS stating that one should perform regular inspections of the LCAs and that they had sent updated heavy duty LCA ball joint pin rebuild kits (P/N 380) free of charge.
I spoke to Mike Schalke at RSS today and he explained that they were doing this to educate RSS LCA users that they need to inspect and replace wear parts on the LCAs regularly. Apparently a customer used the RSS LCAs in one car for a season and then removed the LCAs and...
8 Comments
|
|
|
All times are GMT -4. The time now is 03:19 PM.