|
Articles - General Maintenance & Repair |
pcormier 05-19-2018 04:30 PM
The two plastic trim strips under the front hood, are attached to the body with three pieces of velcro. My 8 year old 2010 987.2 trim strips were flapping due to the velcro giving up.
The velcro was done sticking to stuff...
I spent some time researching high-temp automotive grade velcro. This is mainly why I'm posting this, as well as some advice after replacing it myself.
I ordered the velcro from Amazon, here is a link that will certainly expire.
... and the details that...
4 Comments
His987CS 04-17-2018 08:48 AM
The flexible brake lines that connect the calipers to the brake line hydraulic system are subject to wear and should be replaced periodically. This article provides a guide on how to replace the brake lines on a Cayman. In this article I replace the factory brake lines on my Cayman with new Braided Stainless Steel Brake Lines.
Braided Stainless Steel Brake Lines are a relatively inexpensive way to improve the feel of your Cayman's brakes.
The intent of braided stainless steel brake lines...
8 Comments
Gator Bite 04-04-2018 11:24 AM
A question came up in a discussion about testing Relays. Relays seem like magical little boxes of wonder. They often catch the blame for mysterious electrical gremlins because they're operation is a mystery to most auto enthusiasts. But if we really stop to learn what a relay is and how it works, we will learn that they are really quite simple. Understanding and being able to test them can help us cross them off the list when things go wrong. So let's take a lesson on Relays, how they work and...
8 Comments
Gator Bite 04-09-2015 10:22 AM
The dreaded day arrived for me last fall. I'm writing of course about when my factory Tire Pressure Monitoring System (TPMS) sensors reached the end of their life. My car is a 2007, manufactured in June 2007, put into service in July 2007. I started seeing TPMS malfunctions (the readings all went blank while driving, then came back) in the summer of 2014. So I got about 7 years, 80,000 miles out of my sensors before they went kaput. This is pretty much in line with the 6-8 years that other...
84 Comments
Gator Bite 10-06-2014 10:55 AM
It seems one of the more common failures we see in our Cayman cars are the horns. I know I've had one horn failure in my 2007 and recently Retired Teach had his third horn failure in his 2008. Changing the horns is a relatively easy job, but it does require the removal of the front bumper cover, which makes it a lot less easy and means that you can count on a pretty expensive repair bill if you take your car to the dealership.
Gonzo and I offered to help Retired Teach swap out his horns,...
2 Comments
Gator Bite 03-26-2012 11:08 AM
Changing a battery or suffering a dead battery is something that all of us will experience at one point or another. Our Caymans are very sophisticated. They contain many computerized control modules that may/can/will be effected by loss of battery voltage. This technical article will present the many instructions that Porsche recommends to their mechanics after loss and replacement of battery power.
1
Control Unit Memory
Values and faults stored in the control units can be lost if the...
40 Comments
Rob VN 01-01-2012 04:43 PM
I managed to snap off two of the studs that hold the plastic under tray onto my Cayman.
I dropped the three center under trays to start the repair because there was a broken stud on each side. The dealer and their technicians don't bother to repair broken studs and don't sell any replacement parts. Surfing the web led me to the ClickBond adhesive attached threaded studs used in maritime and aerospace applications for cable tiedown points. The ClickBond part number is CS125-1024-CR. The...
8 Comments
ApexL8 12-04-2011 05:52 PM
I put a diagram together for engine cylinder and bank numbering because I always forget. This should come up in future searches. Thank you to Greywolf for the original picture. Firing Order is 1 - 6 - 2 - 4 - 3 - 5.
Chuck
6 Comments
KS-CS 11-10-2011 07:56 PM
In Part 1, I covered some of the basic functions that can be performed using the Enthusiast version of the Durametric cable. In this tutorial, I will discuss some of the more advanced uses of the cable, including some Coding functions for those who purchase or borrow the Professional cable.
NOTE: Some some of these functions, particularly Activations and Coding could result in damage to your vehicle, as well as disabling some of the normal safety functions of your car. You undertake these...
49 Comments
KS-CS 11-07-2011 03:48 PM
INTRODUCTION
Durametric is a small company which produces a Porsche diagnostic tool for use by independent service shops or individual enthusiasts, and is as close as one can come to owning the equivalent of the PIWIS system that dealer service departments use, for thousands of dollars less. Unfortunately, Durametric provides very little in the way of documentation or tutorials in the use of their tool, which is part of the reason I have decided to write this primer. Some of the...
22 Comments
|
|
|
All times are GMT -4. The time now is 02:27 AM.