|
Articles - Articles |
pcormier 05-19-2018 03:30 PM
The two plastic trim strips under the front hood, are attached to the body with three pieces of velcro. My 8 year old 2010 987.2 trim strips were flapping due to the velcro giving up.
The velcro was done sticking to stuff...
I spent some time researching high-temp automotive grade velcro. This is mainly why I'm posting this, as well as some advice after replacing it myself.
I ordered the velcro from Amazon, here is a link that will certainly expire.
... and the details that...
4 Comments
pcormier 10-14-2012 03:51 PM
Today I replaced the Window Regulator in my passenger side door. It took me about four hours, including eating lunch, doing some laundry and taking crappy photos of the job. This is not a difficult job, nor does it require any special tools other than the trim removal tools and some smaller torx drivers. I think I used 20, 25 and 30, but I'm not sure. It is a little tricky maneuvering the broken Regulator and the replacement regulator behind the partially disconnected inner metal door panel....
9 Comments
|
|
|
All times are GMT -4. The time now is 12:05 PM.